→
Your second kick takes place under the first kick in the Sound slot 2. It will now be trig-
gered by the pad 2 on your controller.
In a similar manner, we will now move the “Snare Ektl A 1” to pad 5:
1. Click and hold the Sound slot 3, which now contains the “Snare Ektl A 1.”
2. While holding the mouse button, drag your mouse down. When the insertion line appears
above the other snare, release the mouse button.
→
Your first snare takes place above the second snare in the Sound slot 5. It will now be
triggered by pad 5 on your controller.
Keep in mind that any change in the Sound slot positions also affects the pads trigger-
ing the corresponding Sounds! Hence, we recommend you practice with your new map-
ping to avoid confusion.
3.3 Save Your Work!
Again, it is recommended to regularly save your work. You can then open another Project or
close MASCHINE and take a break. Your tutorial Project will be recalled as is the next time you
open it.
To save your work in the MASCHINE Software:
►
Press [Ctrl] + [S] ([Cmd] + [S] on Mac OS X) to save your Project.
To save your work using the Controller:
►
Press SHIFT + ALL to save your Project.
3.4 To Sum Up…
In this tutorial, we have learned to:
▪ Open a Project using the Browser (both on your controller and in the software).
Building Your Own Drum Kit
Save Your Work!
MASCHINE STUDIO - Getting Started - 53
To Next Page
Loading...
Need help?
General
