EasyManua.ls Logo

Nautel VS1 - Page 136

Nautel VS1
224 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VS1 Operations and Maintenance Manual Operating the transmitter
Page 2-108 Issue 3.1 2013-10-01
Procedure to change user permissions (see Figure 2.95 on page 2-106):
1. Open the User Accounts page.
2. Select a user from the Users list to display the permissions for that user in the center of the
Permissions window. The permissions associated with the selected user are identified with a
checkmark (;).
3. Press on User Type to reveal a drop-down menu and select a new type of user.
4. If the user type in step 3 is Custom, set individual permissions. Under Permissions, place a
checkmark (;) beside each permission that you want to associate with the user. The boxes
work like a toggle - select the checkbox to place a checkmark and select again to remove the
checkmark. Choose one or more of the following options:
5. Activate/Modify Preset - Allows the user to modify presets and change the active preset.
6. Power Control - Allows the user to change the power set point of the transmitter..
7. Delete Logs - Allows the user to remove log entries.
8. RF On/Off - Allows the user to turn the RF output on and off..
9. All Other Settings - Allows the user to adjust all settings not mentioned above, except for
administrating user accounts.
10. Press Apply to assign the new permissions to the selected user.
Removing an Account
To remove a user account, select the desired user from the List of Users and click the Delete button.
A verification prompt will appear. Click the OK button to accept changes or the Cancel button to
discard changes and exit this menu.
To save your changes, click
Apply.
First-Time Login
When you enter the User Accounts page for the first time, it is recommended you create an account
and then delete the default Nautel account, as follows:
1. Login to the AUI using the default Username (“Nautel”) and Password (blank).
2. Set up your own
Administrator account, with your desired Username and Password.
3. Logout of the AUI, then login to your new Administrator account.
4. Delete the “Nautel” account.

Other manuals for Nautel VS1

Related product manuals