Nautel VS1 - Page 28

VS1 Operations and Maintenance Manual Operating the transmitter
Page 2-2 Issue 3.1 2013-10-01
• System Settings - AUI - see page 2-92
– Resetting the AUI or Exciter - see page 2-94
– Upgrading Software - see page 2-94
– Calibrating Audio Inputs - see page 2-96
– Calibrating Audio - Using the AUI - see page 2-96
– Calibrating Audio - Using the Front Panel - see page 2-97
– IBOC settings - VSHD only - see page 2-98
– Calibrating Exciter TCXO - see page 2-99
– Calibrating Exciter TCXO - Using the AUI - see page 2-99
– Calibrating Exciter TCXO - Using the front panel - see page 2-100
• System Settings - Front Panel UI - see page 2-101
– Configuring ARM Watchdog - see page 2-102
– Configuring RF drive source - see page 2-103
– ARM Reset - see page 2-103
– OS Recovery - see page 2-104
– Firmware Update - see page 2-105
– FM Polarity - see page 2-105
• Setting User Accounts - see page 2-106
– Setting User Type - see page 2-107
– Editing Account Information - see page 2-107
– First-Time Login - see page 2-108
• User Settings - AUI - see page 2-109
– Network Setup - see page 2-111
– Network Setup - Using the Front Panel - see page 2-111
– Network Setup - Using the AUI - see page 2-114
– Email Configuration - see page 2-115
– Notifications - see page 2-116
– Critical parameters - see page 2-122
– SNMP configuration - see page 2-120
– Critical parameters - see page 2-122
– External 10MHz - see page 2-123
– Spectrum mask - see page 2-125
– Setting the Clock - see page 2-125
– NTP servers - see page 2-128
– Nautel Phone Home - see page 2-130
– Setting call sign/ID - see page 2-131
– Audio low thresholds - see page 2-132