NCR 7454 - BIOS Default CMOS Values (Pentium III;Celeron); Main Values

Chapter 3: Setup 3-11
BIOS Default CMOS Values (Pentium III/Celeron)
ThefollowingaretheBIOSdefaultCMOSvaluesfortheworkstation.
Note: WheninstallinganewBIOSfromtheCD,theProcessorBoard
typeisautomaticallydetectedandthecorrectBIOSisautomatically
installed.
Main Values
Note: Anasterisk(*)indicatesavariablevaluebasedonsystem
specification,etc..
System Time
*
System Date
*
Legacy Diskette A:
Disabled
Legacy Diskette B:
Disabled
Primary Master
2168MB
Type Auto
Cylinders 4200
Heads 16
Sectors 63
MaximumCapacity 2168MB
TotalSectors 4233600
MaximumCapacity 2168MB
Multi‐SectorTransfers 16Sectors
LBAModeControl Enabled
32BitI/O Disabled
TransferMode FPI04/DMA2
UltraDMAMode Mode2