NCR 7454 - Ethernet 10;100 Base-T LAN Communications

1-10 Chapter 1: Product Overview
Dual Displays
TheSummaPOSMotherboardisdualdisplay(LCDandCRT)capable.
Inadualdisplayenvironmentthe7454terminalsupports16‐bitcolor
whenbothdisplaysareconnectedtothemotherboard.Bothdisplays
musthavethesamemaximumresolutioncapability.Refertothe
followinginformationfordetailsabout theimplementation
ofadual
displayconfiguration.
• LynxFamilyControlPanelSpecification1.2ontheNCR74xxBase
SystemandClientThirdpartyDriversCD‐ROM(ProductID:
D370‐0111‐0100)orinthevideo.exeself‐extractingVideoDrivers
fileontheRetailSolution sSpecificThirdPartyProductsDriversand
Patches
websiteat:
http://www.ncr..com/support/support_drivers_patches.asp?Class=retail_TPP.
• RetailCustomerInformationDisplayUser’sGuide(BD20‐1431‐B)on
theNCRInformationProductswebsiteat:
http://www.info.ncr.com/eHome.cfm

Ethernet 10/100Base-T LAN Communications
Theterminalcontainsa10/100Base‐TEthernetPCIconnection.
Ethernet100Base‐TisalsoknownasFastEthernet.TheBootROMfor
disklessbootfunctionalityisincludedinthe1MBsystemROM.The
hardwareiscompatiblewiththeTCP/IP,DHCP,andTFTPprotocols
requiredforremotebootofthe
platform.Appropriatesoftwaremust
beusedtoenableeachprotocolusedovertheEthernetlink.
Theterminalmaybeconnectedtoeithera10Mbpsor100Mbps
Ethernetconnection.Thehardwareautomaticallyselectsthecorrect
speed(ifenabledbysoftwaretodoso).
TheLANhardwaresupportswakeuppacketcapability
asdefinedin
theDeviceClassPowerManagementSpecification,NetworkDevice
Class(availablefromtheMicrosoft
®
Website).