NCR 7454 - Reset Display; Erase Display; Invalid Command; Set Diagnostic State

Chapter 6: NCR 7454 4x20 Customer Display 6-7
Command Function Return Status/String
1B01 ResetDisplay No
1B02 EraseDisplay No
1B03 InvalidCommand No
1B04 SetDiagnosticState No
1B05 SetDisplayStateOn No
1B06 SetLowPowerStateOn(Default) No
1B07 EnableCursor No
1B08 DisableCursor(Default) No
1B09 SetScreenSaveBlank(Default) No
1B0A SetScreenSaveWalk No
1B0B TurnOnScreenSave No
1B0C DisableScreenSaveFeature No
1B0D EnableCharacterBlink No
1B0E DisableCharacterBlink(Default) No
1B0F MoveCursorLeft No
1B10 MoveCursorRight No
1B11 MoveCursorUp No
1B12 MoveCursorDown No
1B13 SetCursorPosition No
1B17 BrightnessAdjustment(Default=5) No
1B18 ReadDisplayID Yes
1B19 ReadDisplayIDString Yes
1B20 SelectCharacterSet1(Default) No
1B21 SelectCharacterSet2 No
1B22‐32 Reserved No
1B38 ReadDisplayDataString Yes