NCR 7454 - Updating Procedures

4-2 Chapter 4: Operating System Recovery
Updating Procedures
1. ConnecttheexternalCD‐ROM(2336‐K007)drivetotheparallel
portontheterminal.
2. ConnectthepowerconnectortotheCD‐ROMdrive.
18250
Parallel Connector
Parallel Connector
Power
Connector
Note: Theparallelportonthe7454istheCustomerDisplayport.
Therefore,ifyourterminalisconfiguredwithaCustomerDisplay,
youmusttemporarilydisconnectitinordertousetheCD‐ROM
drive.