NCR 7454 - Boot Values; Exit Values; Interrupts (Pentium III;Celeron)

3-18 Chapter 3: Setup
IDE Drive 0 Monitoring
Disabled
IDE Drive 1 Monitoring
Disabled
IDE Drive 2 Monitoring
Disabled
IDE Drive 3 Monitoring
Disabled
PCI Bus Monitoring
Disabled
Video Power State Control
Auto
Boot Values
Intel ( R ) Boot Agent Version 4.0.17

Hard Drive

ATAPI CD-ROM Drive

Removable Devices

Exit Values
Exit Saving Changes
PressENTER
Exit Discarding Changes
PressENTER
Load Setup Defaults
PressENTER
Discard Changes
PressENTER
Save Changes
PressENTER
Interrupts (Pentium III/Celeron)
Thefollowingtableliststhedefaultsettings.
IRQ System Resource
NMI I/OChannelCheck
0 Reserved,IntervalTimer