NCR 7454 - Peripheral Installation Procedures

2-10 Chapter 2: Hardware Installation
Installing a Remote Customer Display
Theterminalsupportsthreehigh‐postremotecustomerdisplays.The
mountingconfigurationisthesameandappearanceissimilar:
• 5974RemoteCustomerDisplay(4x20characters,VFD)
• 5972‐1000RemoteCustomerDisplay(2x20characters,VFD)
• 5973InternationalVFDCustomerDisplay
5974 Remote Customer Display
16670

1. PlacetheDisplayMountonthedesiredsurfacewithinor4meters
(13feet)ofthehostterminal.
2. Determineifthecable shouldberouteddownthroughthe
mountingsurfaceorifitshouldberunontopofthesurface.