NCR 7454 - Updating Procedures

5-2 Chapter 5: BIOS Updating Procedures
Updating Procedures
1. ConnecttheexternalCD‐ROM(2336‐K007)drivetotheparallel
portontheterminal.
2. ConnectthepowerconnectortotheCD‐ROMdrive.
18250
Parallel Connector
Parallel Connector
Power
Connector
Note: Theparallelportonthe7454istheCustomerDisplayport.
Therefore,ifyourterminalisconfiguredwithaCustomerDisplay,you
musttemporarilydisconnectitinordertousetheCD‐ROMdrive.
3. Applypowe rtotheterminalsotheCD‐ROMdrivecanbeopened.
4. Insert
theBIOSupdateCD.
NCRBIOSandBIOSUpdateSoftware
LPIN:A370‐0022‐0100