NCR 7454 - Cable Routing and Connector ID

Chapter 2: Hardware Installation 2-7
RS-232 Installation
1. ConnectthePrinterInterfaceCabletotheRS‐232Connectoronthe
backoronthebottomoftheprinter.
16632a
RS-232 Connector
Power Connector
Cash Drawer Connector

2. ConnecttheotherendoftheprintercabletooneoftheRS‐232
(non‐powered)portsontheterminal.
3. ConnecttheexternalpowersupplycabletothePowerConnectoron
theprinter.
4. PlugtheexternalpowersupplyACcableintoanACoutlet.