NCR 7454 - BIOS Default CMOS Values (Pentium); Main Values

3-4 Chapter 3: Setup
BIOS Default CMOS Values (Pentium)
ThefollowingaretheBIOSdefaultCMOSvaluesfortheterminal.
Note: WheninstallinganewBIOSfromtheCD,theProcessorBoard
typeisautomaticallydetectedandthecorrectBIOSisautomatically
installed.
Main Values
System Time
(variable)
System Date
(variable)
Legacy Diskette A:
144MV/1.25MV,3½ʺ
Legacy Diskette B:
Disabled

IDE Primary Master

Type [Auto]
Cylinders 4191
Heads 16
Sectors/Track 63
MaximumCapacity 2163MB
Multi‐SectorTransfers 16Sectors
LBAModeControl Enabled
32BitI/O Disabled
TransferMode FastPIO4
UltraDMAMode Disabled
