Index-2
Invalid Command, 6-8
Move Cursor Down, 6-14
Move Cursor Left, 6-13
Move Cursor Right, 6-13
Move Cursor to Specified Position, 6-14
Move Cursor Up, 6-13
Read Display Data String, 6-16
Read Display ID Byte, 6-15
Read Display ID String, 6-16
Reset Display, 6-8
Select Character Set n, 6-16
Set Diagnostic State, 6-9
Set Display State On, 6-9
Set Low Power State On, 6-10
Set Screen Save Blank, 6-11
Set Screen Save Walk, 6-11
Turn On Screen Save, 6-11
—D—
dual display implementation, 1-9
—E—
Ethernet 10/100Base-T, 1-10
—F—
Finalizing the Installation after hardware
installation, 2-26
FLASH memory implementation, 1-18
—G—
Gold disk contents, 4-8
—H—
Hard disk drive, 1-29
Hardware monitor, 1-13
Hardware options, 1-4
Features not supported, 1-6
—I—
Installing the Integrated Customer
Display, 2-17
Integrated customer display
Description, 1-22
Internal speaker, 1-29
Interrupts, 3-8, 3-9, 3-17, 3-19
—L—
LAN status LEDs, 1-31
LCD adapter board, 1-21
LCD backlight inverter module, 1-21
—M—
Magnetic stripe reader, 1-14, 1-18
Model number, 1-2
Motion sensor, 1-30
Mounting the terminal
Pedestal-mount, 2-24
MSR, 1-14, 1-18
—O—
Operating System Recovery
Using CD-ROM, 4-1
Operating System Restrictions, 4-9
To Next Page
Loading...
