NCR 7454 - Page 71

Chapter 2: Hardware Installation 2-21
7. RemovethePowerSupplyCoverfromthe7454unit.
a) Removethescrews(2)thatsecurethecover.
b) Pressinonbothsidesofthecoverandliftitupinthebackto
removeit.
20049
Screws (2)
Press in on Both Sides

8. InstalltheCustomerDisplayandCoverassemblyontothe7454
(2screws).
16713

9. ConnecttheDisplayCabletotheCustomerDisplayconnectoron
theterminal.