NDD easyone pro User Manual

EasyOne Pro™ / EasyOne Pro™ LAB 141
Appendix
Example: EMR Application "TurboMed"
TurboMed Software Settings
The following settings have to be applied only when the EMR interface is
used.
 Start TurboMed software and select the record of a patient.
 In the patient record select "Konsultationen / Geräteanbindung".
 Select "Gerät anbinden".
 Enter the following:
 Confirm the entry with: Save.
 Confirm the Geräte anbinden dialog with End.
These adjustments are sufficient for the set up of the EMR software. Now
proceed with the set up of EasyOne Pro™.
Setup EasyOne Pro™ Software
When the EMR interface is used for the first time, the following settings have
to be made:
 Start EasyOne Pro™.
 Open the menu Utilities / Configuration / EMR.
 Enter the path of the EMR folder according to the export path set in EMR
TurboMed (in the above example c:\nddmed\).
 Enter the EMR computer name as "TurboMed".
 Confirm the dialog with OK.
 Close EasyOne Pro™.
Field Entry Description
Name EasyOne Pro™ Name of equipment
Program c:\nddmed\EasyWarePro.exe Complete path of EasyWare software.
Export File c:\nddmed\nddturbomed.gdt Name and path of the export file.
Import File c:\nddmed\turbomedndd.gdt Name and path of the import file. The path (in
the example c:\nddmed\) must be identical
with the export file path.
Type 2 Version of the GDT / EMR interface

NDD easyone pro Specifications

General

Brand	NDD
Model	easyone pro
Category	Medical Equipment
Language	English