NDD easyone pro User Manual

Appendix
142 EasyOne Pro™ / EasyOne Pro™ LAB
Performing a Measurement
The following describes the test procedure.
 Start TurboMed, select a patient and open that file.
 Select Konsultationen / Geräteanbindung.
 Select EasyOne Pro™ and then Start.
The patient data entry window appears automatically.
 Enter the required data.
 Confirm with OK.
 Select the appropriate test type (FVC, FVL, SVC, MVV) and confirm with
Enter.
 Perform a complete test with the patient.
 Print a report if required.
 Finish EMR (sends data to EMR and closes EasyOne Pro™).
TurboMed now receives the data.
 Confirm with OK.
 Close the program now with Ende.
Data accepted by EasyOne Pro™ from EMR / GDT
The following data is read in by EasyOne Pro™ from the GDT interface. The
data that is actually transmitted depends on the EMR (GDT) system used.
Excessive data is ignored by EasyOne Pro™.
GDT Field ID Description Comment
8000 Record ID
8316 GDT-ID of EMR
3000 Patient ID The ID may include letters and num-
bers. Maximum length: 15
3101 Name Last Name, maximum number of
characters: 47
3102 First Name First name, maximum number of char-
acters: 47
3103 Date of Birth
3110 Gender (1 = male)

NDD easyone pro Specifications

General

Brand	NDD
Model	easyone pro
Category	Medical Equipment
Language	English