5-2 I/O Board Installation
This chapter provides information for adding I/O boards to the
Express5800/1160Xd/1320Xd PCIX Unit. Only a technically qualified person
should integrate and configure I/O boards into the server.
!
CAUTION
Server options other than I/O boards require installation and
configuration by a trained NEC technician.
Identifying PCI Slots
The PCIX unit has 14 PCI-X slots. One Basic I/O Board can be installed in this
unit to support the standard I/O interface.
Figure 5-1 shows the PCI slots in the PCIX unit, Table 5-1 lists board/card
allocations for the PCI slots in the PCIX unit, Figure 5-2 shows 66-MHz slots
assigned to two bus groups in the PCIX unit, and Table 5-2 lists PCI slot
addressing in the PCIX unit.
PCI01
PCI02
PCI03
PCI04
PCI05
PCI06
PCI07
PCI09
PCI10 PCI08
PCI11
PCI12
PCI13
PCI14
Figure 5-1. PCI Slots in the PCIX Unit
To Next Page
Loading...
