I/O Board Installation 5-3
Table 5-1. PCI Slot Allocation in the PCIX Unit
Configuration Slot Number Board/Card Type Comments
PCI01 Basic I/O Board* DVD: Connected by IDE interface.
PCI02 SCSI Card DAT: Connected by SCSI interface.
PCI03 VGA Card*
PCI04 ~ PCI13 Free Slots
Basic I/O Board,
VGA Board,
SCSI Cards (for
DAT and Device
Bay)
PCI14 SCSI Card Device Bay: Connected by SCSI
interface
PCI01 SCSI Card DAT: Connected by SCSI interface.
PCI02 ~ PCI13 Free Slots
SCSI Cards (for
DAT and Device
Bay)
PCI14 SCSI Card Device Bay: Connected by SCSI
interface
PCI01 ~ PCI13 Free Slots SCSI Card (for
Device Bay)
PCI14 SCSI Card Device Bay: Connected by SCSI
interface
*Configuration for Core PCIX Unit.
133MHz Slot05
66MHz Slot02
66MHz Slot01
66MHz Slot03
66MHz Slot04
133MHz Slot06
133MHz Slot07
66MHz Slot08
66MHz Slot09
66MHz Slot10
66MHz Slot11
133MHz Slot12
133MHz Slot13
133MHz Slot14
*1
*2
*1: 66-MHz slots on Slots 01 to 04 bus group.
*2: 66-MHz slots on Slots 08 to 11 bus group.
Figure 5-2. PCI Slots and Bus Groups in the PCIX Unit
Note: Installation of a board in a particular slot and with other
boards can determine the actual operating frequency of a board within
a bus group. See the next section “Selecting a Slot” for information
about installing a board in a particular slot for optimum operation. Also
see Table 5-2 for PCI slot addressing which includes Host Bus Bridge
number information.
To Next Page
Loading...
