4-38 Configuring Your Server
3. When a confirmation message (Proceed?) is displayed, select "Yes."
The SCAN DEVICE starts (scanning information is displayed at the bottom of the screen).
Upon completion of SCAN DEVICE, the "New Configuration - ARRAY SELECTION
MENU" screen appears.
4. Move the cursor onto the hard disk drive to be packed by using cursor key and then press
Space to select the hard disk drive.
The display for the selected hard disk drive changes from READY to ONLINE.
5. Press F10 to set "Select Configurable Array(s)".
6. Press Enter.
SPAN-1 is set.
To Next Page
Loading...
