Configuring Your Server 4-13
Memory Configuration
The following screen appears if you select "Memory Configuration" on the Advanced menu.
See the table below for the items.
Option Parameter Description Your Setting
System
Memory
– Indicates the total capacity of the base
memory. (View only)
Extended
Memory
– Indicates the total capacity of the memory
available for OS. (View only)
DIMM Group
#1 - #6
Status
Normal
Disabled
Not installed
Indicates the current memory status. (View
only)
"Normal" indicates that the memory devices
operate normally.
"Disabled" indicates that one or more memory
devices are defected.
"Not Installed" indicates that no memory
devices are installed.
On-screen group numbers and DIMM sockets
on mother board are associated as follows.
Group #1: DIMM #1-1, #2-1
Group #2: DIMM #3-1, #4-1
Group #3: DIMM #1-2, #2-2
Group #4: DIMM #3-2, #4-2
Group #5: DIMM #1-3, #2-3
Group #6: DIMM #3-3, #4-3
Each group is composed of two DIMMs of
interleave type.
Memory
Retest
[No]
Yes
If you select [Yes], BIOS will clear historical
memory status and retest all the DIMMs on
the next boot.
This parameter is automatically
reset to "No" at the next boot.
To Next Page
Loading...
