Internal Cabling Diagrams 10-5
Installing Internal DVD-RAM Drive
The internal DVD-RAM drive is an IDE device option. The server can be equipped with one
internal DVD-RAM drive. Set the operation mode of optional DVD-RAM drive to "SLAVE". (The
factory-installed DVD-RAM drive is set to "MASTER".)
Use the cable connected to the onboard IDE connector. First connect the cable to internal DVD-
RAM drive, and then to the factory-installed DVD-RAM drive.
IDE device
DVD-ROM
5.25-inch
device bay
3.5-inch hard
disk drive bay
Hard disk drives
are optional.
Mother board
SAS cable IDE cable
PCIe #5
PCIe #4
PCIe #3
PCI #2
PCI-X #1
To Next Page
Loading...
