NEC Express5800 120Li - Interface Cable Connection Examples

10-2 Internal Cabling Diagrams
INTERFACE CABLES
An example of the connections of interface cables between devices within the server and external
devices is shown below.
Standard Configuration
The figure below shows an example of the connections in the standard configuration. The onboard
SAS #1 connector is connected to the hard disk drive bay.
Option
Option
DVD-ROM
5.25-inch
device bay
3.5-inch hard
disk drive bay
Hard disk drives
are optional.
Mother board
SAS cable
IDE cable
PCIe #5
PCIe #4
PCI-e #3
PCI #2
PCI-X #1