EasyManua.ls Logo

NEC Express5800 120Li - Appendix A Specifications

NEC Express5800 120Li
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A
Specifications
NEC Express5800/120Li
Item
N8100-1239F N8100-1240F N8100-1325F N8100-1326F N8100-1298F
Type
Dual-core 64-bit Intel Xeon processor
(Extended memory 64 technology supported)
Clock/2nd cache 1.6GHz/4MB 3GHz/4MB 2GHz/4MB 2.33GHz/4MB 2.33GHz/8MB
Standard 1
CPU
Maximum 2
Chipset
Intel 5000P (667 / 1066 MHz)
Type SDRAM DIMM (DDR2-533, Chipkill) SDRAM DIMM
(DDR2-667,
Chipkill)
Error check ECC
Standard
2 GB (1 GB × 2)
Memory
Maximum
48 GB (4 GB × 12, the standard DIMM must be replaced.)
Graphics (VRAM) Server Engines Pilot GA (VRAM 2MB)
Hard disk drive
(standard)
None
Hard disk drive
(maximum)
586 GB (146.5 GB × 4)
1.172 TB (146.5 GB × 8)
when optional HDD cage is installed.
Hard disk drive
(hot-plug)
Supported
Hard disk drive
(disk controller)
SAS
Floppy disk drive
(optional)
USB 3.5-inch floppy disk drive
Auxiliary
storage
device
DVD-ROM
(standard)
ATAPI interface × 1 (x18 to x40 speed)
DVD: x6 to x16 speed, CD: x20 to x48 speed
5.25-inch file bay 3 slots (An ATAPI DVD-ROM drive is factory-installed.)
3.5-inch disk bay 4 slots + 4 slots (optional)
PCI EXPRESS 3 slots
64-bit/100MHz 1 slot
Additional
PCI slot
32-bit/33MHz 1 slot
LAN 1000Base-T / 100Base-TX / 10-Base-T (2 ports)
Management LAN 100Base-TX / 10-Base-T (1 port)
Disk array RAID0 / RAID1 / Spanning of RAID1 (standard) / RAID5 (optional)
Keyboard MINI DIN 6-pin connector (1 port)
Mouse MINI DIN 6-pin connector (1 port)
USB2.0 4-pin (4 ports, 2 at front, 2 at rear)
Serial D-sub 9-pin (2 ports)
Parallel IEEE1284 standard, D-sub 25-pin (1 port)
Network RJ-45 (2 ports)
External
interface
Display MINI D-sub 15-pin (1 port)
Cabinet design Desk-side, mini tower

Table of Contents

Other manuals for NEC Express5800 120Li

Related product manuals