8-20 Troubleshooting
Problems with Windows Server 2003 R2
There are some cases that an event log is registered as follows when you operate Windows
Server 2003 R2.
Source: IPMIDRV
Type: Error
Event ID: 1001
Description: The IPMI device driver attempted to determine if the system supported an
IPMI BMC device. The driver attempted to detect the presence of the IPMI
BMC by searching the SMBIOS for Type 38 record. But either no record
was found or the record was not compatible with the version of the device
driver.
If a SMBIOS Type 38 record was detected, the Dump Data field of the
event contains a binary representation of the record.
→ If you use "Hardware Management" which is provided by Windows Server 2003 R2,
above-shown event log will be registered.
For more details, refer to "Enabling Microsoft Windows Server 2003 R2 Hardware
Management" on the following site.
[NEC Express5800 Web Site]
http://www.nec.co.jp/express/download/W2K3_R2
To Next Page
Loading...
