General Description 2-11
STANDARD FEATURES
High performance Expandability
Dual-core 64-bit Intel
Xeon
Processor
N8100-1239F: 1.6GHz/4MB Cache
N8100-1240F: 3GHz/4MB Cache
N8100-1325F: 2GHz/4MB Cache
N8100-1326F: 2.33GHz/4MB Cache
N8100-1298F: 2.33GHz/8MB Cache
High-speed 1000BASE-T/100BASE-TX/
10BASE-T interface
(1000Mbps/100Mbps/10Mbps supported)
High-speed disk access (SAS)
Wide variety of optional I/O slots
Three PCI EXPRESS (8-bus) slots
One 64-bit, 100 MHz PCI-X slot
One 32-bit, 33 MHz PCI slot
Large memory of up to 48GB
Two network ports and one
management LAN port
Remote power-on feature
Up to two Intel Xeon processors
Two hot-plug power supplies
(Redundancy)
USB 2.0 supported
Convert to rack-mount type (N8143-
61F Rack Conversion Kit is required.)
High-reliability Many Available Features
Graphic accelerator "Pilot GA" support
El Torito Bootable CD-ROM (no emulation
mode) format support
POWER switch mask
Software power-off
Remote power-on feature
AC-LINK feature
Remote console feature
Self-diagnosis
Memory monitoring feature (single-bit
error correction/double-bit error detection)
Memory redundant feature (mirroring,
sparing)
CPU/memory degradation feature (logical
isolation of a failed device)
Bus parity error detection
Temperature detection
Error notification
Internal CPU fan monitoring feature
Internal voltage monitoring feature
Redundant power supplies (hot-swap)
Disk array (option)
Auto-rebuild feature (hot-swap)
BIOS password feature
Security feature (security lock)
Power On Self-Test (POST)
Test and Diagnosis
Management Utilities Maintenance Features
NEC ESMPRO
NEC DianaScope
Disk array utilities
Remote monitoring by EXPRESSSCOPE
Off-line Maintenance Utility
Memory dump feature using the DUMP
(NMI) switch
Power Saving Feature Easy and Fine Setup
Sleep feature
(available for Windows 2003)
NEC EXPRESSBUILDER (system setup
utility)
SETUP (BIOS SETUP utility)
To Next Page
Loading...
