NEC Express5800 120Li - Updating the System - Installing Service Pack; Making Backup Copies of System Information

Installing the Operating System with Express Setup 5-27
Updating the System – Installing Service Pack –
Update the system in the situation below:
 Modified system configuration.
 Recovered the system using recovery process.
Log on to the system with the account that has administrative authority (e.g. Supervisor) and insert
the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive of the server.
[Setup Software] in [Master Control Menu] screen appears, so left-click the item. Click [Update the
System] from the menu and the setup will start. After that, follow the message to continue the setup
process.
Making Backup Copies of System Information
The system information includes the current BIOS settings and any specific information for the
server.
Save the information after completing the system setup.
Without the backup data, you will not be able to recover the information.
You can save the information by the following process.
1. Insert the "NEC EXPRESSBUILDER" CD-ROM into the DVD-ROM drive and reboot
the system.
2. Select [Tools].
3. Select [Off-line Maintenance Utility].
4. Select [System Information Management].
5. Insert a floppy disk into the floppy disk drive.
6. Select [Save].