Upgrading Your Server 9-31
5.25-inch Device
The server contains three slots in which backup devices including DVD-ROM and magnetic tape
drives can be installed. The DVD-ROM drive is factory installed in bottom slot. To install a backup
device, you must prepare a separately priced SCSI controller.
IMPORTANT:
Two single-height devices or one double-height device can be
installed.
Set the SCSI termination of the device to be installed to OFF and
assign a unique SCSI ID not duplicated or corrupted with that of
any other device. Refer to the documentation coming with each of
the devices for how to assign an ID.
For single-height device, first install a device in slot 1. Then install
another device in slot 2.
For double-height device, install the device to the slots 2 and 3.
To install the N8151-32B internal DVD-RAM, set the operation
mode to "SLAVE".
Slot 3
Slot 2
Slot 1
To Next Page
Loading...
