9-32 Upgrading Your Server
Installation
1. See the section "Preparing for Installation and Removal" described earlier to prepare.
2. Remove the side cover.
3. Remove the two screws fixing the dummy cover.
4. Pull out the dummy cover toward you carefully.
5. Fix the rails coming with the server to the 5.25-inch device by using the four screws
coming with the device.
IMPORTANT:
Always use the screws coming with the 5.25-inch device. Using
longer screws or those of different diameter may cause the device to
be broken.
When installing a double-height device, use the DLT device rails
(larger L-shaped rail) that come with the server.
To Next Page
Loading...
