NEC Express5800 120Li - Appendix C IRQ and I;O Port Address

Appendix C
IRQ and I/O Port Address
The factory-set interrupt requests and I/O port addresses are listed below. Find an appropriate one to
install an optional device.
Interrupt Request
The factory-set IRQs are assigned as follows:
IRQ Peripheral Device (Controller) IRQ Peripheral Device (Controller)
0 System timer 9 ACPI
1– 10PCI
2– 11BMC
3 Serial port COM2 12 –
4 Serial port COM1 13 Numeric coprocessor
5 PCI 14 Primary IDE
6 – 15 Secondary IDE
7– 16PCI
8 Real-time clock