5-20 Installing the Operating System with Express Setup
Notes of N8103-75
After installing OS, the driver may not be installed depending on the method of installing OS
occasionally.
In that case, please install the driver by the following procedures.
1. Start [Device Manager] from [Start] menu → [Control Panel]→ [Administrative Tools]→
[Computer Management].
2. Double-click the SCSI Controller driver which Device Manager lists as Other device.
3. Click [Update Driver].
4. When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5. Select "Don't search. I will choose the driver to install" and click [Next].
6. Click [Have Disk..].
7. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8. Specify the following driver and click [Next].
– [INITIO INI-A10XU2W PCI SCSI Controller] (When N8103-65F board is installed.)
– [Adaptec SCSI Card 29320ALP -Ultra320 SCSI ] (When N8103-75 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
To Next Page
Loading...
