Installing the Operating System with Express Setup 5-25
Windows Dr. Watson
Windows Dr. Watson is a debugger for application errors. If any application error is detected, Dr.
Watson diagnoses the server and logs diagnostic information (log). Follow the procedure below and
specify Dr. Watson to collect diagnostic information.
1. Click [Run] on Start menu.
2. Type "drwtsn32.exe" in the [Open] box, and click [OK].
The [Dr. Watson for Windows] dialog box appears.
3. Specify the location to store the diagnostic information in the [Log File Path] box.
The diagnostic information will be stored with the file name "DRWTSN32.LOG".
NOTE: You can not specify network path. Specify the path on local
computer.
4. Specify the location of crash dump file in the [Crash Dump] box.
NOTE: "Crash Dump File" is a binary file that can be read with
Windows Debugger.
5. Check the following check box on the [Option] box.
Dump Symbol Table
Dump All Thread Contexts
Add To Existing Log File
Create Crash Dump File
For more information on each function above, refer to Online Help.
6. Click [OK].
To Next Page
Loading...
