7-10 Maintenance
7. Follow the guide line shown at the bottom of the screen, and press the Esc key.
The [Enduser Menu] below is displayed.
Enduser Menu
Please choose a function by the arrow key and push Enter key.
<Test Result>
<Device List>
<Log Info>
<Option>
<Reboot>
TeDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)
Enduser Menu
<Test Result> Shows the diagnostics completion screen of the above diagnostics.
<Device List> Shows a list of connected devices.
<Log Info> Shows the log information of the diagnostics. It can be saved on a floppy
disk.
To save it on a floppy disk, insert a formatted floppy disk to the floppy
disk drive, and select <Save(F)>.
<Option> Optional features can be used from this menu.
<Reboot> Reboots the system.
8. Select <Reboot> in the [Enduser Menu] above.
The server restarts and the system is started from the NEC EXPRESSBUILDER.
9. Exit the NEC EXPRESSBUILDER, and remove the CD-ROM from the DVD-ROM
drive.
10. Power off the server and unplug the power cord from the receptacle.
11. Reconnect all the LAN cables that have been disconnected in Step 2. to the server.
12. Plug in the power cord.
This completes the system diagnostics.
To Next Page
Loading...
