NEC Express5800 120Li - Page 252

9-38 Upgrading Your Server
List of optional devices and their available slots
Product name
PCI-X
#1
PCI
#2
PCIe
#3
PCIe
#4
PCIe
#5
PCI slot capability
*1
64 bit/
100MHz
32 bit/
32MHz
x8 lane
Slot size Full-height
PCI board type
*1
3.3V 5V x8 socket
N code
Available board size Long/short
Note
N8103-95
SCSI controller
(64-bit/66MHz PCI)
√√
–––
Cannot connect with internal
hard disk drive.
N8103-75
SCSI controller
(64-bit/133MHz PCI-X)
√√
–––
Cannot connect with internal
hard disk drive.
N8103-126
SCSI controller
(64-bit/133MHz PCI-X)
√√
–––
2 max.
Cannot connect with internal
hard disk drive.
For connection with SATA
disk array
N8103-91
Disk array controller for
onboard SAS
(PCI EXPRESS (x4))
––
√√√
1 max.
3 max. with N8103-90/80/81
N8103-90
Disk array controller for
external SAS
(PCI EXPRESS (x4))
––
√√√
3 max.
Cannot connect with internal
hard disk drive.
3 max. with N8103-80/81/91
N8103-80
Disk array controller (1 ch)
(64-bit/66MHz PCI)
√√
–––
Cannot connect with internal
hard disk drive.
3 max. with N8103-91/90/81
N8103-99
Disk array controller (0 ch)
(64-bit/133MHz PCI-X)
√
––––1 max.
N8103-81
Disk array controller (2 ch)
(64-bit/66MHz PCI)
√√
–––
Cannot connect with internal
hard disk drive.
3 max. with N8103-91/90/80
N8104-111
100BASE-TX adapter
(32-bit/33MHz PCI)
√√
–––2 max.
N8104-86
100BASE-TX adapter
(32-bit/33MHz PCI)
√√
–––2 max.
N8104-119
1000BASE-T adapter
(64-bit/133MHz PCI-X)
√√
–––
N8104-120
1000BASE-T adapter (2 ch)
(64-bit/133MHz PCI-X)
√√
–––
Cannot co-exist with N8104-
112.
N8104-114
1000BASE-T adapter
(PCI EXPRESS (x1))
––
√√√
Teaming with another N8104-
114 is allowed.
N8104-121
1000BASE-T adapter (2ch)
(PCI EXPRESS (x4))
––
√√√
2 max.
N8104-112
1000BASE-SX adapter (2ch)
(64-bit/133MHz PCI-X)
√√
–––
1 max. per PCI bus (2 max.
per PCI bus with AFT)
Cannot co-exist with N8104-
103/113.
√: Available, –: Unavailable
Onboard LAN Controller Considerations
It is possible to configure the Teaming function of AFT (Adapter Fault Tolerance)/ALB (Adaptive
Load Balancing) in a standard network controllers (on board LAN controllers). But it is impossible
to configure the Teaming function of the same AFT/ALB on a standard network controller and an
optional LAN board.