Configuring Your Server 4-27
Boot
If you move the cursor to the position of "Boot," the Boot menu appears, which is used to set the
boot priority.
The server searches for devices in the order set in this menu on booting. Finding the boot software,
the server starts the software.
The priority of the boot devices can be changed by using the ↑, ↓, +, and - keys. Move the cursor to
the desired device with the ↑ or ↓ key and change the priority with the + or - key.
IMPORTANT: To boot NEC EXPRESSBUILDER, set the priority of
the devices as shown in the figure above.
To Next Page
Loading...
