NEC Express5800 320Fd-MR - Server

4-20 System Configuration
Server
Move the cursor onto [Server] to display the Server menu.
The following describes options you can configure in the Server menu and their functions.
Select an option with the “►” mark and press Enter to display its submenu.
Refer to the table below for information on options.
Option Parameter Description
Post Error
Pause
Disabled
[Enabled]
Set whether or not to pause POST at the end
of POST if an error has occurred during
POST execution.
AC-LINK Stay Off
[Last State]
Power On
Specify the AC-LINK feature by selecting the
status of the power supply unit of the server
when the AC power supply restarts. (See the
following table for details.)
Power ON
Delay Time
[180]-255(s) Configure the DC-ON delay time if AC-LINK
is set to “Power On” or “Last State” (unit:
second).
[ ]: factory default
MainAdvancedSecurityServerBootExit
ftServerSetup
F1Help↑↓SelectItem-/+ChangeValuesF9SetupDefaults
EscExit←→SelectMenuEnterSelectSub-MenuF10SaveandExit

SystemManagement
ConsoleRedirection
EventLogConfiguration
MonitoringConfiguration

PostErrorPause:[Enabled]

AC-LINK:[LastState]
PowerOnDelayTime:[180]
ItemSpecificHelp

Additionalsetup
menutoview
servermanagement
features.
