System Configuration 4-35
FORCED SHUTDOWN AND CLEAR
Read this section if your server does not operate as expected, or if you want to return all setup
values to those made at shipment.
Forced Shutdown
Use this function when an OS command does not shut
down the server, the POWER switch does not turn off the
server, or resetting does not work.
Press and hold the POWER switch on the primary server
for over 4 seconds. The power is forcibly turned off. To
turn on the power back again, wait approximately 30
seconds after the forced shutdown.
Press this for over 4 seconds.
To Next Page
Loading...