4-10 System Configuration
Advanced
Move the cursor onto “Advanced” to display the Advanced menu.
Select an option with the “►” mark and press Enter to display its submenu. Display each sub menu
and make settings on the sub menu screen.
See the table below for setup options on the screen.
Option Parameter Description
Boot-time
Diagnostic Screen
[Disabled]
Enabled
Specify whether to display the Power On Self-Test (POST)
screen at start-up. If “Disabled” is selected, the NEC logo
appears while POST is in progress. (To display POST check
results, press Esc.)
[ ]: factory default
To Next Page
Loading...