Appendix A
Specifications
NEC
Express5800/320Fd-LR
NEC
Express5800/320Fd-MR
Item
N8800-128F N8800-129F
Factory-set model Install model
Type
Quad-Core Intel Xeon
Processor 2.00GHz
Quad-Core Intel Xeon
Processor 3.00GHz
Clock/second cache
1333MHz/6MB 2
Standard Up to 1 processors (the number of processors installed per
module)
CPU
Maximum Up to 2 processors (the number of processors installed per
module)
Chipset Intel Blackford + ESB2M
Standard 2GB (1GB x 2*)
* the number of memory per module
Maximum 12GB (The standard DIMM
must be replaced.)
24GB (The standard DIMM
must be replaced.)
Expansion unit 2 DIMMs
Memory module DDR II SDRAM DIMM (Fully Buffered)
Memory
Error check ECC
Graphics (VRAM) ATI ES1000
Floppy disk (option) 3.5 inch drive x 1 (USB)
DVD-ROM
(standard)
DVD Combo（Load type: tray. Speed: x6）
Hard disk (standard)
None
Auxiliary
input
device
Hard disk
(maximum)
None
ExtensionFile bay (3.5 inch) None
Additional slot PCI-X 133MHz, 64bit, Low Profile x1, PCI-X 133MHz, 64bit
Full Height, Full Length x1, (Fibre Channel board is
implemented standard.)1 slot (Low profile : PCI-X 133MHz,
64 bit), 1 slot (Full height, full length : PCI-X 100MHz, 64 bit),
1 slot (PCI-Express x4 lane x8)
LAN interface 1000BASE-T/100BASE-TX/10BASE-T (2 ports)
USB 4-pin connector (3 ports) Keyboard occupies 1one port.
Network RJ-45 (2 ports)
External
interface
Display MINI D-sub 5-pin (1 port)
To Next Page
Loading...