6-2 Maintenance
DAILY MAINTENANCE
To use your NEC Express5800/ft series in best condition, check and maintain regularly as described
below. If an error is found on your NEC Express5800/ft series, consult your sales agent.
Checking Alert
Monitor the failure occurrence by NEC ESMPRO during the system operation.
Always check whether any alert is reported to NEC ESMPRO Manager on the management PC.
Check whether any alert is reported on the Operation Window, Data Viewer, or Alert Viewer of
NEC ESMPRO Manager.
Viewers of NEC ESMPRO
Operation Window
Alert Viewer
Data Viewer
Checking STATUS LEDs
Check the LED indication on the front of the NEC Express5800/ft series when the server is powered
on or powered off by the shut down operation. The functions and indications of LEDs are described
in Chapter 2. If any indication that shows an error, contact your sales agent.
To Next Page
Loading...