NEC Express5800 320Fd-MR - Boot

System Configuration 4-27
Boot
Move the cursor onto “Boot” to display the Boot menu.
The server searches for the boot device according to the order specified in this menu and use the
software to boot the system if found.
You can change the boot device order using  or  and + or –. Move the cursor to select the device
by  or , and then change the priority using + or –.
IMPORTANT:
Move to set “CD-ROM Drive” above “Hard Drive” when you boot the NEC
EXPRESSBUILDER.
MainAdvancedSecurityServerBootExit
ftServerSetup
F1Help↑↓SelectItem-/+ChangeValuesF9SetupDefaults
EscExit←→SelectMenuEnterSelectSub-MenuF10SaveandExit

CD-ROMDrive
RemovableDevices
+HardDrive
Network(IBAGESlot7C00v1236)
Network(IBAGESlot7C01v1236)
ItemSpecificHelp

Keysusedtoviewor
configuredevices:
<Enter>expandsor
collapsesdeviceswith
a+or– 
<Ctrl+Enter>expands
all
<Shift+1>enablesor
disablesadevice.
<+>and<->movesthe
deviceupordown.