General Description 2-3
Hardware modules work while synchronizing and comparing with each other. Even if one hardware
module stops, the server can continue its operation as the service with the other hardware module.
NEC Express5800/ft series is a highly fault-tolerant Windows server that achieves continuous
computing operations, data storage mirror, and continuous network connection. It allows you to run
Windows Server 2003-based applications.
NEC Express5800/ft series achieves continuous computing operations for the Windows server and
server-based applications with its redundant CPU processing and redundant memory. It assures data
redundancy through duplication of server data on an independent storage system. These features
eliminate server downtime that is usually caused by network disconnection or trouble with the I/O
controller, Ethernet adapter or disk drive, and support operation of the network and server
applications continuously. While being transparent to application software, NEC Express5800/ft
series achieves high fault-tolerance.
NEC Express5800/ft series detects status changes, errors and other events and notifies the Windows
Event Log of these events. If you use an alarm notification tool, you can configure NEC
Express5800/ft series to notify you when certain events occur.
NEC ESMPRO is installed on the system as a server management solution. NEC ESMPRO, a
GUI-based management tool, allows you to monitor, view, and configure NEC Express5800/ft
series. This tool also supports both local and remote management of NEC Express5800/ft series.
Standard product
New fault-tolerant technology
Compare/Sync
Memory
Memory
CPU Module 0
CPU Module 1
I/OI Module 0
I/O Module 1
To Next Page
Loading...