Installing and Using Utilities 5-41
MTBF clear
Component
Remote Local
SCSI
Enclosure
– –
SCSI
Electronics
– –
SCSI Slot – –
Remote: Executable from remote management PC by using NEC ESMPRO Manager
Local: Executable on local server by using ft server utility
–: Not support
Procedure in NEC ESMPRO Manager
Perform the procedure below before replacement of a component.
1. Select the target component in the [ft] tree.
2. Check the current state with the “State” display on the target component screen.
3. Click the [MTBF Clear] button in the [Maintenance] screen for the target component.
The MTBF clearing result can be verified by 0 in“Faults” in [MTBF information] on the
target component screen.
4. Start the component.
Sample screen of NEC ESMPRO Manager
[Maintenance] screen of SCSI enclosure
[PCI module] – [Maintenance]
To Next Page
Loading...