Maintenance 6-11
Features of Off-line Maintenance Utility
Following functions are available on Off-line Maintenance Utility.
■Off-line Maintenance Utility
The Off-line Maintenance Utility is started in “Maintenance Utility.” The Off-line Maintenance
Utility is an Os-independent maintenance program. When you are unable to start the Os-dependent
NEC ESMPRO to troubleshoot a problem, the Off-line Maintenance Utility can be used.
IMPORTANT:
– The Off-line Maintenance Utility is intended for use of your service representative.
The NEC EXPRESSBUILDER DVD contains a file that describes
the operation of the utility, but do not attempt to use the utility by yourself. Contact your
service representative and follow their instructions.
– See the on-line help for details for the Off-line Maintenance Utility.
For further information, ask your service representative.
The Off-line Maintenance Utility provides the following features.
– IPMI Information Viewer
Provides the functions to view the system event log (SEL), sensor data record (SDR), and
field replaceable unit (FRU) and to make a backup copy of them.
Using this feature, you can find system errors and events to determine a maintenance part.
– BIOS Setup Viewer
Provides the functions to export the current configuration data defined with the SETUP
utility to a text file.
– System Information Viewer
Provides the functions to view and information on the processor (CPU) and on the BIOS.
You can export the information to a text file.
– System Information Management
Provides the function to make a back-up copy of your data.
Without the backup data, the system-specific information and/or configuration may not be
restored.
Only the authorized service maintenance staff is allowed to restore the backup data.
To Next Page
Loading...