System Upgrade 8-15
7. Remove the DIMM connector cover from
the socket in which the DIMM is installed.
A DIMM connector cover is installed to the
open socket. When the levers on both ends
of the connector are opened, the DIMM
connector cover is unlocked and you can
remove the cover.
IMPORTANT:
Keep the removed DIMM connector
cover.
8. Insert a DIMM into the DIMM socket vertically.
TIPS:
Pay attention to the orientation of the
DIMM. The end terminal of the DIMM has
a notch to prevent misinsertion.
After the DIMM is completely inserted into
the socket, the levers are automatically closed.
9. Attach the memory duct
10. Place the top cover of the CPU/IO module and
secure it with the screws.
11. Refer to page 8-100 and install the CPU/IO module.
12. Connect the power cords.
13. Press the POWER switch to power on the server.
To Next Page
Loading...