System Configuration 4-5
F9:
Shows the following:
F10:
If you select “Yes” and then press the Enter key, all items in the
setup are set to default values. If you select “No” and then press
either the
Enter or Esc key, the status before pressing the F9
key is restored.
Shows the following:
If you select “Yes” and then press the Enter key, the setup will
complete with all changes you have made saved. If you select
“No” and then press either the
Enter or Esc key, the status
before pressing the
F10 key is restored.
To Next Page
Loading...