NEC ITK-8LCX-1 TEL - TO CHANGE GROUP NAME; ABOUT INPUT TELEPHONE NUMBER

OPERATION
48
When the new entry is made from the
terminal, the photo data cannot be
registered.
The number of name character is up to
32. Refer to the “HOW TO INPUT
CHARACTERS” about how to input
character.
Group name is can be changed. Refer to
the “TO CHANGE GROUP NAME” .
Ringtone can be set for each name,
group, or terminal basis. The ringer
tone setting is effective with the
following order.
Name -> Group -> terminal.
If you do not want to change the
ringtone, select “Default”.
If you select “Automatic”, Tone Type 1
is applied.
Refer to the “TO SET RINGER TONE” for
the detail about ringer tone .
Illumination can be set for each name,
group, or terminal basis. The
illumination setting is effective with the
following order.
Name -> Group -> terminal.
If you do not want to change the
illumination, select “Default”.
If you select “Automatic”, Red color is
applied.
4. Save the data.
After the input data, press soft key 2 “Save”.
ABOUT INPUT TELEPHONE NUMBER
1. Input the number.
2. Select category.
Category icons are as follows
Category
Icon
Company
Cell Phone
Voice Mail
Home
Etc
No Category
3. Set the priority flag.
Set the priority for the number used for
making call at search result screen.
If you want to set priority for the telephone
number, select “Enable”.
When the priority is not set to the
telephone, the call is made to the lower
registration telephone number.
TO CHANGE GROUP NAME
1. Press local soft key 1 (Option) at phone book
screen.
2. Select “ 4 Group Settings”.
3. Select the group to change name.
4. Select “ 1 Name”.
5. Input the group name.
Up to 32 digits can be registered for
each dial number.
6. Confirm the changed group name.
Group menu is indicated again.
At procedure 3. , It is possible to set
the ring tone or illumination for each
group.
Ringtone or Illumination is set for each
name, the group or the terminal basis.