NEC NC900C Installation Manual

25
Before Setting Up Your Projector
1-5-1. Removing and Mounting the Front Cover
Preparation: Phillips head screwdriver (No.2) and cover key (attached goods)
1
Loosen the screw securing the front cover until the Phillips screwdriver goes into a freewheel-
ing conditions.
The screw is not removable.
2
Unlock the front cover.
Unlock the cover using the cover key.
Key lock
3
Remove the front cover.
Lift up the cover slightly and then pull it towards you to remove it.
This completes removing the front cover. To mount the cover, perform the removal procedure in reverse. Make sure that you
do not forget to tighten the screw or to lock the key lock.

NEC NC900C Specifications

General

Brand	NEC
Model	NC900C
Category	Projector
Language	English