NEC NC900C - Connecting with the Image Input Port

59
Projector Adjustment and Connecting
3-8. Connecting with the Image Input Port
By installing option board to projector, you can add input port. Input port which can add to option board is listed below. For
the connection diagram of projector and peripheral equipment, refer to Installation manual of option board.
Option Board Image Input Port
NC-90MS01 (Note 1) HDMI input port x1
3G SDI input port x2
NC-80LB01-B/NC-80DS01-B (Note 2) HD-SDI input port (BNC)x4
DVI-D input port (DVI-D 24pin)x2
(Note 1) This is included as standard with the projector.
(Note 2) NC-80LB01-B supports CineLink 2, and NC-80DS01-B does not support CineLink 2. NC-80DS01-B cannot display the
encrypted contents.