NEC NC900C - Adjusting the Lens; Display the Test Pattern

54
Projector Adjustment and Connecting
3-6. Adjusting the Lens
Display the test pattern and adjust the screen size, focus and screen position with the lens unit.
3-6-1. Display the Test Pattern
1
Press the MENU button.
“Title Select” is displayed on the LCD screen at the projector’s control panel.
2
Press the DOWN button.
3
Press the LEFT/RIGHT buttons to select “TEST Pattern”.
4
Press the DOWN button.
5
Press the LEFT/RIGHT buttons to select “Cross Hatch”.
6
Press the ENTER button.
An (*) will be put on the selected test pattern.