32
Setting Up Your Projector
2-3-1. AC Power Work Specications
AC power supply equipment
Do not use any voltage other than those shown below for the AC power supply connected to the projector.
100–130V AC, single phase, power, 50/60Hz
200–240V AC, single phase, power, 50/60Hz
Breaker
Connect the AC power supply from the power supply equipment of the building to the projector via a breaker. The breaker
capacity will be as follows depending on the power supply voltage.
AC power supply voltage used Breaker current capacity
100–240V 20 A
To Next Page
Loading...
